Seal for Windmöller & Hölscher (W&H) Soloflex press
Seal for Windmöller & Hölscher (W&H) Soloflex press
High precision, water jet cut, chamber end seal
Made from a hard, medium density, polyethylene foam material. Typically suited to medium run flexo. Good abrasion resistance but with reduced memory retention, offering good all-round performance. Non-absorbent and highly resistant to most solvent based inks and coatings.
| Weight (KG) | 1.00 |
|---|---|
| Seal Profile | 03-1008 |
| Length(A) | 92.5mm |
| Height (B) | 23.5mm |
| Thickness (C) | 12mm |
| Material / Colour | Grey |
| Press make | Windmöller & Hölscher (W&H) |
| Model | Novoflex, Miniflex, Soloflex |
Medium run chamber end seal suitable for W&H flexo printing press
- Material: SureFlexPRO
- Dimensions: 92.5mm x 23.5mm x 12mm
- Part No: 03-1008
- Suitable for use in: Windmöller & Hölscher (W&H) Miniflex, Novoflex & Soloflex
-
PrimeBlade 300PrimeBlade® 300 series is our basic, but very commonly used, carbon steel used in printing houses worldwide. The base steel material is made from genuine high quality Swedish steel. Together with our Swedish raw material supplier and end users, the doctor blade was developed to improve production quality, blade lifespan and to increase machine speeds. This is thanks to the increased amount of carbides/µm² in the steel microstructure, compared to cheap and low quality carbon steel.